User's Manual

11
7. 3D models (.stl files) or 2D image files (.png, .jpg, .bmp files) can be loaded for each well group on the
3D Model page. When loading 3D models, the software will ask for the maximum dimensions in x, y, z
directions and the number of layers to be sliced. When loading 2D image files, the software will only ask
for the dimension in z direction as the x, y dimensions are set by the 2D image design. The table below
provides the maximum dimensions that can be printed in x, y, z directions for each combination of
printing probes and well plates.