C20-16-00-00 C10-16-09-03 C10-12-04-00 MODEL 028251 ASSEMBLY AND DRESSING INSTRUCTIONS Blending innovative design, cutting-edge technology and the grace and elegance of traditional crystal, ALLEGRI® proudly brings you a new approach to lighting. ALLEGRI® fixtures are made from the finest raw materials and are brought to life through a combination of traditional manufacturing, such as sand casting, hand-forging and technology driven techniques including laser cutting.
ASSEMBLY AND DRESSING INSTRUCTIONS WARNING! CONTENTS ARE FRAGILE HANDLE WITH CARE THE METAL FRAME, FINISH AND CRYSTAL COMPONENTS OF THIS CHANDELIER ARE VERY DELICATE. PLEASE EXERCISE EXTREME CAUTION DURING UNPACKING AND INSTALLATION. PLACE ALL PIECES TOGETHER IN A NUMERICAL ORDER AND IN THE ORIENTATION DEPICTED. REFER TO THE PARTS LIST TO AVOID ANY CONFUSION BETWEEN PARTS THE PARTS NUMBER MUST COINCIDE.
CANOPY MOUNTING INSTRUCTION WARNING Electrical Danger Turn Power Off All electrical components must be installed by a licensed electrician in accordance with the National Electric code and the appropriate local electrical codes. Solid Nipple R c Hex nut and washer Outlet box (by others) Mounting block M5 Screw 8/32"Screw Canopy Nipple INSTALL CANOPY AS FOLLOWS CAUTION: Be sure power is off at the main breaker box prior to installation. 1.
CANOPY MOUNTING INSTRUCTION WARNING Electrical Danger Turn Power Off All electrical components must be installed by a licensed electrician in accordance with the National Electric code and the appropriate local electrical codes. c R Wall Wall plugs Outlet box (by others) Mounting block M8 Stud 8/32 Screw Tapping screw Canopy Hex nut Nut INSTALL CANOPY AS FOLLOWS CAUTION: Be sure power is off at the main breaker box prior to installation. 1.
FRAME ASSEMBLY INSTRUCTIONS MODEL 028251 B The dash area of the wire lock sleeve is flexible,when it shrinks in ,the safety wire's length can be adjusted. 1-Canopy B 2-Steel wire 3-Round metal sheet 4-Insulation 5-Mounting block 6-Main body 7-Hex nut 8-Cone nut INSTALLATION a. Turn off electricity, take all parts from part box. b. Connect the main wire with the power supply circuit. See wire connection diagram. c. Fix part #3,#4 to part #5 by using screw. d.
CRYSTAL DRESSING INSTRUCTION WARNING MODEL 028251-010-FR001 ATTENTION Electrical Danger C20-16-00-00 Turn Power Off C10-16-09-03 C10-12-04-00 1. Take all crystal or glass parts carefully from carton, then put them on a clean cloth. 2. Installing all crystal clusters per above illustration from top to bottom. All electrical components must be installed by a licensed electrician in accordance with the National Electric code and the appropriate local electrical codes.
CRYSTAL DRESSING INSTRUCTION MODEL 028251-010-FR001 1080/K9/22#,5pcs; /20#,2pcs; /18#,8pcs; /16#,4pcs 1080/K9/22#,2pcs; /20#,6pcs; /18#,5pcs; /16#,8pcs 1080/K9/22#,7pcs; /20#,3pcs; /18#,3pcs; /16#,4pcs 1080/K9/22#,3pcs; /20#,4pcs; /18#,6pcs; /16#,6pcs 2020/K9/22#,2pcs; /18#,4pcs 2020/K9/22#,4pcs; /18#,4pcs 2020/K9/22#,3pcs; /18#,6pcs 2020/K9/22#,4pcs; /18#,4pcs 32041/K9/50#,1pc 82401/K9/63#,1pc 52011/K9/60#,1pc 873/K9/38#,1pc C1(6pcs） C2(5pcs） C4(5pcs） C3(5pcs） Chain C（6pcs): L795mm,2pcs (1
LIGHTING CARE INFORMATION Every ALLEGRI® fixture is of heirloom quality and will last for generations. To ensure it retains its brilliance and splendor for years to come, proper care and regular cleaning are necessary. It is recommended that ALLEGRI® fixture, and particularly their crystal trim, be lightly dusted with a feather or lambs wool duster, or soft brush every two months, or whenever it appears dull or dusty. A thorough cleaning should be completed every six months.
