AI 022751

ManualsBrandsAllegri ManualsCeiling LightsAdaliz 022751-010-FR001 28" Pendant in Chrome Finish with Firenze Clear Crystals

Table Of Contents

MODEL 022751

ASSEMBLY AND DRESSING INSTRUCTIONS

as sand casting, hand-forging and technology driven techniques including laser cutting.

Enclosed are detailed instructions on how to properly install your fixture. Please read all instructions carefully. If you need further assistance, please

hope you enjoy your fixture!

WWW.ALLEGRICRYSTAL.COM

866.820.2665

Summary of content (6 pages)

PAGE 1
MODEL 022751 ASSEMBLY AND DRESSING INSTRUCTIONS as sand casting, hand-forging and technology driven techniques including laser cutting. Enclosed are detailed instructions on how to properly install your fixture. Please read all instructions carefully. If you need further assistance, please hope you enjoy your fixture! P1 WWW.ALLEGRICRYSTAL.COM 866.820.
PAGE 2
ASSEMBLY AND DRESSING INSTRUCTIONS WARNING! CONTENTS ARE FRAGILE HANDLE WITH CARE THE METAL FRAME, FINISH AND CRYSTAL COMPONENTS OF THIS CHANDELIER ARE VERY DELICATE. PLEASE EXERCISE EXTREME CAUTION DURING UNPACKING AND INSTALLATION. PLACE ALL PIECES TOGETHER IN A NUMERICAL ORDER AND IN THE ORIENTATION DEPICTED. REFER TO THE PARTS LIST TO AVOID ANY CONFUSION BETWEEN PARTS THE PARTS NUMBER MUST COINCIDE.
PAGE 3
CANOPY MOUNTING INSTRUCTION WARNING Electrical Danger Turn Power Off All electrical components must be installed by a licensed electrician in accordance with the National Electric code and the appropriate local electrical codes. Solid Nipple c R Hex nut and washer Outlet box (by others) Mounting block M4 Screw 8/32"Screw Nipple INSTALL CANOPY AS FOLLOWS CAUTION: Be sure power is off at the main breaker box prior to installation. 1. Drill a hole on main ceiling beam and pass Solid Nipple through.
PAGE 4
FRAME ASSEMBLY INSTRUCTIONS MODEL 022751 A Hex screw Steel wire A 1-Steel wire lock sleeve 2-Canopy 3-Steel wire 4-Metal lathe 5-Cap 6-Main body 7-Steeve 8-Metal ring 9-Metal frame INSTALLATION a. Turn off electricity, take all parts from part box. b. Connect the main wire with the power supply circuit. See wire connection diagram. c. Fix part #7 to part #6 by using screw. d. Fix part #8 to part #7 by using screw. e. Fix part #9 to part #6 by using screw. f.
PAGE 5
WARNING MODEL 022751 Electrical Danger Turn Power Off All electrical components must be installed by a licensed electrician in accordance with the National Electric code and the appropriate local electrical codes. ATTENTION 1. Take all crystal or glass parts carefully from carton, then put them on a clean cloth. 2. Start hanging crystals from bottom center to top of fixture in an alphabetical order as shown in diagram R You will need 16 - Cand.
PAGE 6
LIGHTING CARE INFORMATION splendor for years to come, proper care and regular cleaning are necessary. duster, or soft brush every two months, or whenever it appears dull or dusty. A thorough cleaning should be completed every six months. its proper location after cleaning. Should a replacement trim diagram be required, please call cleaned with limited removal of crystal, while others must be completely untrimmed.