AI 020370

WARNING
Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician in
accordance with the National
Electric code and the appropriate
local electrical codes.
R
WWW.ALLEGRICRYSTAL.COM
866.820.2665
P3
1-Outlet box (by others)
5-Canopy
6-Collar loop
7-Collar loop ring
8-Easy link (2pcs)
9-Chain
2-Cross Bar
3- Threaded Nipple
8
32
" Screw 4-
Hex Nuts
Step1- Install cross bar2 to outlet box1 with outlet box original
screws4.
Step2- Install Threaded Nipple3 to crossbar, adjust length, secure
with hex nuts and instal canopy5 and collar loop6, secure canopy
with collar loop ring6 and hang chain.
Step3- Determine chain lenght and cut to adjust.
Hang fixture to bottom end of chain with the easy link8.
Step4- Lace fixture power cord and ground wire every 4 links all the
way up to canopy.
Step5- Unscrew collar loop ring7 to release canopy, bring down
canopy and positioned carefully on top of fixture while connecting
wires.
Step6- Split fixture power cord in two, connect fixture ribbed wire to
power supply black wire. Connect fixture smooth wire to power supply
white wire. Connect fixture ground wire to green wire. Secure
connections with plastic wire nuts and electrical tape or according to
your local electrical code.
Step7- Raise canopy carefully (so it don't get scratched with chain )
flat to ceiling to cover outlet box and secure it with collar Loop Ring7.
Canopy Installation Instructions: