Use and Care Manual

www.allavino.com 5 1-888-980-4809
Door Reversal
CAUTION: To avoid accidents while reversing the door, we recommend that you have someone to help you. The glass
door is heavy and may cause injury if dropped. Please note that the lock will only work with the door in the right hinge
configuration.
Step 1: Open the door as wide as possible and take off the decorative nails (drawing 1).
Step 2: Disassemble the pivet core of the upper and lower door hinges using the six angle screwdriver (drawing 2).
Step 3: Use a magnet to remove the door shaft core from the two ends of the top of the door (drawing 3).
Step 4: Discharge the door core and remove the door from the cabinet.
Step 5: Use a screwdriver to discharge the upper and lower door hinges (drawing 4).
Step 6: Use the accessories in the accessory bag to assemble the door on the opposite side.
1
2 3
1
1
3
2
4
5
2 3
5
4
8
4
7
9
9
10
8
6
6
11
1. Decorative Nail
2. M4 Six Angle Screwdriver
3. M4 Door Limit Screw
4. Pincer
5. Door Core
6. Slot Type Screwdriver
7. Upper Door Hinge
8. Lower Door Hinge
9. M5 Six Angle Screwdriver
10. Lower Door Hinge
11. Knife
12. M5 Six Angle Screwdriver