Installation Guide

All Style Industries, LLC 2114
Sunset Vista Avenue
Henderson, NV 89052
702-570-5520 or fax [phone]
"mailto:[e-mail]" www.spinflashing.com,
www.stormcollar.com
Installation Instructions
All Style Medium Standard “STD-Storm” Collar Flashings
Medium STD-Storm Collar Flashing
One Retro-Split Collar Includes:
1. One (1) All Style Industries Small STD-Storm Collar® EPDM rubber umbrella
flashing boot which includes one (1) storm collar, and one (1) stainless steel band
clamp.
Tools & Other Building Materials Required for Kit Installation:
1. One Nut Driver or Screw Driver
Installation of a Retro-Split Storm Collar Flashing:
An STD-Storm Collar is molded to correctly match the geometric diameter size of a roof
penetration which has already passed through a roof deck flashing jack. The roof deck
flashing jack raises the roof deck level higher than any expected high rain water level,
and the STD-Storm Collar “Counter-Flashes” the Roof Flashing creating a weatherproof
assembly via the down facing overlap or umbrella effect. It is necessary to order the
correct diameter opening on the STD-Storm collar to create a weatherproof assembly.
In order to install an STD-Storm Collar Umbrella, the top of the penetration must be
accessible for the collar to slide on from the top. STD-Storm Collars are not retro-fit
repair collars and must slide onto a roof penetration.
Please review the following installation
instructions to be assured of receiving the
quality you expect when installing a
Medium STD-Storm Collar Flashing