Specification

Catalog #
Project
C
omments
P
repared by
Type
D
ate
S
P E C I F I C A T I O N F E A T U R E S
ALL-PRO
DESCRIPTION:
The EI400ATSB is a small aperture housing for providing accent and
task lighting. The EI400ATSB is designed for use in insulated ceilings
where it will be in direct contact with insulation. AIR-TITE design
meets restricted airflow requirements.
O
u t er H o u s i n g
Aluminum construction with
IC - insulated ceiling and
AT - AIR-TITE™ ratings.
I
n n e r H o u s i n g
Double wall aluminum construction
helps dissipate heat. The inner
housing can be adjusted in the
plaster frame to compensate for
different ceiling materials.
P
l a s t e r F r a m e
• Galvanized steel construction.
• The inner housing can be
removed from the plaster frame
to provide access to the junction
box.
• Plaster frame includes locking
screws for hanger bars and
cutouts for crimping hanger bars
in position.
• AIR-TITE gasket is pre-installed.
J u n c t i o n B o x
• Positioned to accommodate
straight conduit runs.
• Seven conduit knockouts are
uniform 1/2” size with true pryout
slots.
• Four pryouts with integral strain
relief simplify “NM” non-metallic
sheathed cable installation.
• Three quick connect wire
connectors included.
A
L L - N A I L ™ B a r H a n g e r s
Bar Hanger features include:
• Pre-installed nail.
• Mini leveling foot aligns the
housing to the bottom of the joist.
• Housing can be positioned at any
point within 24” joist spans
• Score lines allow tool-free
shortening for narrow joist
spacing.
• Integral T-bar clip snaps onto
T-bars – no additional clips are
required.
S
o c k e t
Adjustable position bracket with
porcelain socket and nickel plated
brass screw shell provides flexibility
in lamp positioning.
T h e r m a l P r o t e c t o r
Thermal protector deactivates
fixture if overheating occurs due
to improper lamping.
L
a b e l s
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location,
covered ceiling
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Direct Contact
with Insulation and combustible
material
Q u a l i f i c a t i o n
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling and
restricted air-flow requirements
such as:
• Washington State Energy Code
• International Energy Conservation
Code (IECC)
• New York State Energy
Conservation Construction Code
(NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
EI400ATSB
4" Insulated Ceiling
AIR-TITE™ Recessed
Housing with
Adjustable Socket
Bracket
4 " T R I M S
F O R U S E I N
I N S U L A T E D C E I L I N G S
F O R D I R E C T
C O N T A C T W I T H
I N S U L A T I O N
A I R - T I T E ™ H O U S I N G
P R E V E N T S A I R F L O W
B E T W E E N A T T I C A N D
L I V I N G A R E A S
ADV110473
3/11/11
www.cooperlighting.com
4-1/4˝
[108mm]
Ceiling
Opening
5-3/8˝
[136mm]
6˝
[152mm]
8-1/2˝
[216mm]
ADJUSTABLE SOCKET
™