Dimensions Guide

Specifications and dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]
APEL SERIES
TECHNICAL DATA
LED Heads
The Long Life LED Emergency Heads are the
most economical Emergency Light solution
for general purpose applications. Designed
specifically for emergency lighting applications
with horizontal and vertical adjustment by
rotating the LED Emergency Heads to desired
direction.
Housing Construction
Rugged, durable, injection molded
thermoplastic materials are used throughout
the All Pro Series Emergency Lighting Units.
All structural components are designed with
reinforcing ribs to add additional rigidity and to
maximize structural integrity. These materials
are impact and scratch resistant, and they have
been UV stabilized to resist discoloration due
to age and ultraviolet radiation. All components
are designed to be of snap-fit construction - no
mechanical fasteners - to facilitate installation
in under 5-minutes. The mounting plate
has keyhole mounting slots and a universal
mounting pattern for quick, efficient installation.
Any components required for installation
(wirenuts, wire leads, etc.) are all included with
each unit. All APEL Series Units are suitable for
wall or ceiling mount applications.
Line-Latched
All Pro Emergency’s line-latched electronic
circuitry makes installation easy and
economical. A labor efficient AC-activated
load switch prevents the lamps from turning
on during installation to a non-energized AC
circuit. Linelatching eliminates the need for a
contractor’s return to a job site to connect the
batteries when the building’s main power is
permanently turned on.
Solid-State Charger
Supplied with a 120/277 VAC, voltage regulated
solid-state charger. Upon restoration of AC
current after a power failure, the charger
provides a high charge rate. The charge circuit
reacts to the condition of the battery and alters
the rate of charge in order to maintain peak
battery capacity and maximize battery life.
Solid-state construction recharges the battery
following a power failure in accordance with UL
924.
Brownout Circuit
The brownout circuit in All Pro Emergency units
monitor the flow of AC current to the unit and
activates the emergency lighting system when
a predetermined reduction of AC power occurs.
This dip in voltage will cause most ballasted
fixtures to extinguish causing loss of normal
lighting even though a total power failure has
not occurred.
Low Voltage Disconnect
When the battery’s terminal voltage falls below
80% of the rated voltage, the low voltage
circuitry disconnects the lighting load. The
disconnect remains in effect until normal utility
power is restored, preventing deep battery
discharge.
Test Switch/Power Indicator Light
A test switch permits the activation of the
emergency circuit for a complete operational
system check. The Power Indicator Light
provides assurance that the AC power is on.
Sealed Nickel Cadmium Battery
All Pro Emergency sealed nickel cadmium
batteries are maintenance free with a life
expactancy of 15 years. The sealed rechargable
nickel cadmium battery offers high discharge
rates and stable performance overa a wide
range of temperatures. The specially designed
resealable vent automatically controls cell
pressure, assuring safety and reliability.
This battery is best suited for harsh ambient
temperatures because the electrolyte is not
active in the electrochemical process.
Warranty
All Pro Emergency units are backed by a five-
year warranty.
ADX110026
2013-12-16 15:04:54