Standalone (built-in PC), fully automated asynchronous CD/DVD Duplication System User Manual 1351 East Black Street • Rock Hill, SC 29730 Tel: 803-980-4141 • Fax: 803-980-4145 • www.allprosolutions.
Olympus Series/ Automated Asynchronous CD/DVD Duplicator System / User Manual COPYRIGHT_____________________________________________________________________ Copyright © 2000–2011 All Pro Solutions, Inc All Rights Reserved. This manual and the software described in it are copyrighted with all rights reserved.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Table Of Contents Quick Start.......................................................................................................................... 1 Getting Started ………………………………………………………………………………..1 Manufacturer Recommendations ………………………..…………………………………..2 Mounting the Tower …………...……………………………………………………………...2 Mounting the Printer …………...…………………………………………………………….2 Operating Environment……………………………………………………………………….
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Quick Start Getting started The removal of this product should be undertaken by at least 2 people because of its size and weight. Please ensure safe manual handling procedures are followed Carefully remove your system from it’s shipping box and verify that all parts are present.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual disposed of your packaging materials, you can receive a new set from All Pro Solutions for a fee.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Place your printer (with its own plate mounted on the bottom) on top of tower. Do not tighten the screws until the printer alignment is made. Proceed with “Connecting Power” (page 4) and “Drive and Printer Alignment” (see page 6). When alignment is OK, please tighten front left and front right thumbscrews # 3 at the same time. Repeat this operation for rear left and rear right thumbscrews # 3. Fig.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Operating Environment Your APS System should be used in a climate-controlled environment free of dirt, dust, excess humidity, excessive heat or electro-magnetic interference. Your APS System should be placed on a sturdy level surface – away from sources of vibration and excessive lighting. Allow at least four (4) inches of clearance around the sides and back of the system for ventilation.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Fig 3b. Autoloader and PC connections Fig 3c.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Fig 3d. 7-Drive Tower connections Drive and Printer alignment Open Align.exe on your desktop and you will see “TEST” under Saved Sessions as in fig. 4a. Make sure the connection is on COM3 and the settings are correct as in fig. 4b.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Fig. 4a Alignment Settings Fig.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Fig. 4c Device Manager Once the tower is aligned, gently tighten thumbscrews # 1 on both sides until they touch the adapter and then tighten thumbscrews # 2 (they attach the tower to the autolaoder – see Fig.7). Repeat the same steps to align the printer. Fig. 5 Side View Now cycle the power to your system. Remember to turn on in this sequence: Printer, Tower, Autoloader/PC.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Overview Before you start using this system, please read the following to ensure proper operation: DVD Duplication Limitations The DVD system will not copy any DVDs that have Copy Protection encoded in the content. Typically, most DVDs you purchase or rent from a store, contain Copy Protection. In addition to the copy protection limitation, the autoloader will only copy a DVD5 format (4.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Disc Static and Sticky Media Issues The most common problems when using an autoloader are the disc static and sticky media issues. These static charge problems cause multiple discs to stick together, resulting in improper operation and more severely, can shock the robotic arm while loading a disc that causes the system freeze.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual The Robotic Platform The robotic arm picks blank discs from Input Bin # 1 first, and places the successful copies into the Output Bin. Once Input Bin # 1 is empty, it picks blank discs from Input Bin # 2, and places the successful copies into Input Bin # 1 which becomes Output Bin # 2. It then picks from Input Bin # 3 and places into Input Bin # 2 which becomes Output Bin # 3 and so on.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Basic Operation Please turn on your system in the following order: Printer, Tower, Autoloader/PC. If the printer tray opens automatically, please push tray button to close. Keep this order every time you turn on your system Your system comes with all software (required for your configuration) already installed.
Olympus Series / Automated Standalone Asynchronous CD/DVD Duplication System / User Manual Printer Support If your configuration includes a printer, follow the instructions in your Printer User Manual to create a label file. Print files accepted: .prn, .plf, .
