User manual

HERA Series CD/DVD Duplication System / User Manual

Loader Utilities

5.Alignment Protection

Alignment Protection

Off

Duplicator B.30

14.Manage Accounts

Note: If the drive trays are not properly aligned and there is a need to re-align them, please

contact Tech Support Service for information regarding setting alignments.

Warning: This function is ONLY for checking the alignment, NOT for setting the alignment.

Please do not move the robotic arm with your hands during this process.

When you have finished checking the alignment of the drive(s), the robotic arm will move the disc to

the arms top position and hold it there. You will see the Alignment Next menu.

Drive Alignment

Alignment Next?

Press the

Enter button to return back to the Please Select

Drive menu. This allows you to complete the alignment checking

procedure for each of the installed drives.

If you are through checking the alignment of drives, press the

ESC button to go back to the Loader Utility Menu.

When the drive alignment checking process is complete, the robotic arm will drop the disc in the Reject

Area.

13.2 Alignment Protection

Enabling Alignment Protection causes each drive tray to quickly slide in and out after a disc has been

loaded into it. This ensures that the disc is set properly in the disc indentation in the tray by “shaking”

the disc into place.

For example, if the disc is not placed squarely in the center as it should be, but rather slightly off the lip,

the “shake” will cause the disc to slide into position in the center of the tray.

To enable the Alignment Protection function:

Use the

Up or Down button to select the Alignment

Protection menu and press the

Enter button to enter

that menu.

Use the

Up or Down button to select whether Alignment

Protection is on or off, and press the

Enter button to select

that option.

14. Manage Accounts

This feature allows the administrator to:

 Create user accounts and passwords to prevent unauthorized use of this autoloader.

 Edit existing user account information, including name and password.

 Delete existing user account(s).

For complete information on Manage Accounts, see “Introduction to Manage Accounts” on page 16.

To access the Manage Accounts feature, you need to perform the following tasks: