User manual

ManualsBrandsAll Pro Solutions ManualsBusiness equipmentHERA-9

HERA Series CD/DVD Duplication System / User Manual

Setup

2. Read Error Skip

Read Error Skip

Off

Setup

3. CD Writing Mode

CD Writing Mode

Disc at Once

CD Writing Mode

Track at Once

Setup

4. Max Audio, VCD & CDG Speed

Use the Up or Down button to select between the languages and press the Enter button to

select that option.

11.2 Read Error Skip

Normally, when the autoloader encounters a read error while reading your master disc, the duplication

is aborted and all the recordable media in the writers are ruined. However, if you believe that your

master disc has a small, insignificant error due to physical damage, you can enable this setting to allow

the autoloader to skip any read errors it encounters.

Note: This function does not fix the error; it only skips it to make the rest of the data readable.

Use the

Up or Down button to select the Read Error Skip

menu and press the

Enter button to enter that menu.

Use the

Up or Down button to select whether Read Error Skip is

on or off, and press the

Enter button to select that option.

11.3 CD Writing Mode

This setting allows you to select which mode to use to duplicate a CD; “Disc at Once” or “Track at

Once.” Unless you understand completely what these modes are, we strongly suggest you to set it to

“Disc at Once.”

Use the

Up or Down button to select the CD Writing Mode

menu and press the

Enter button to enter that menu.

Use the

Up or Down button to select either Disc at Once or Track

at Once, and press the

Enter button to select that option.

11.4 Max Audio, VCD & CDG Speed

Due to the lack of error checking mechanism for Audio CD, Video CD and CD+G format, duplicating

them at too high a speed can cause frequent errors like glitches and skips. Use this setting to adjust

the maximum duplication speed for Audio, Video CD and CD+G format to ensure reliable duplication

for such formats.

The options are: 1x, 2x, 4x, 8x, 12x, 16x, 24x, 32x, 40x, 48x, and 52x.

Use the

Up or Down button to select the Max

Audio, VCD & CDG Speed menu and press the

Enter button to enter that menu.