User manual

ManualsBrandsAll Pro Solutions ManualsBusiness equipmentHERA-9

HERA Series CD/DVD Duplication System / User Manual

Load Partition

[HAPPY ], OK?

Load Partition OK!

Press OK to Finish

Hard Drive Setup

4. Delete Partition

Choose Partition

2->[FUN ] CD

Delete Partition

[FUN ] CD,

OK?

Partition FUN

Deleted

Hard Drive Setup

5. Partition Info

Enter a new partition name as

described in “Editing Names”

on page 13. For this example,

we will name it “Happy”.

Press the

Enter button to overwrite the

partition named “FUN”. Before continuing, the

autoloader will ask you again to confirm it.

Edit Partition Name

[FUN ] OK?

Enter a new partition name as described in

“Editing Names” on page 13. For this

example, we will name it “HAPPY”.

The system will display a verification message before continuing. Pres the

Enter button to start loading the partition named “HAPPY”.

The master should be placed on the first input spindle. The robotic arm will pick it up and place it into one

of the drives, and the contents of the master disc will be loaded into the desired partition.

Pres the

Enter button to finish.

10.3 Rename Partition

When you load your master disc onto a hard drive partition, you are asked to give it a name. However, you

can rename it at anytime afterwards. Instructions for this are shown in “Editing Names” on page 19.

10.4 Delete Partition

The Delete Partition option deletes an existing partition. Use the Up or Down button to navigate to

the 4.Delete Partition menu.

Press the

Enter button to enter the Delete Partition menu. The

autoloader will first ask you to choose the partition to be deleted:

Use the

Up or Down button to find the partition that you want to

delete. Press the

Enter button to select the partition.

The autoloader displays the Delete Partition confirmation message. Press

the

Enter button to continue.

The autoloader displays the Deleted message for two seconds and then

returns you to the Delete Partition menu.

10.5 Partition Info

The Partition Info option provides information about an existing partition. Use the Up or Down

button to navigate to the 5. Partition Info menu.