User manual

HERA Series CD/DVD Duplication System / User Manual
21
Master Mode:
Multi Master
Master Mode:
Single Master
Duplicator B.30
1. Copy (SM)
Choose Partition
3->[FUN ]CD
Counter:
No Counter
Preparing...
Please Wait
Loader Processing
Drive 1 <- Input Bin
Processing...
Please Wait
Use the
Up or Down button to select Single Master Mode. Press the
Enter button to submit your selection.
Go back to the Copy Menu. Use the
Up or Down button to navigate to the following screen:
Start the Copy Process. Insert your blank discs on to the Input
Spindle(s) and press the
Enter button to enter the Copy menu.
You will see the Choose Partition menu:
Use the
Up or Down button to find the partition where your master
disc is stored. Press the
Enter button to select that Partition. Next, you
will see the Counter Selection menu:
Follow the instructions shown in “Setting Counters” on page 18 to
continue. Once the counters have been set, press the
Enter button to
confirm. You will see the Processing screen:
After a short interval, the robotic loader will pick the top disc from the input
spindle and place it into one of the drives. As this is happening, you will see
a screen similar to below:
This information screen shows what is happening. In this case, the
loader has taken a disc from the input spindle and is placing it into
Drive 1.
The loader will continue to remove discs from the input spindle and place those into drives until either all
of the drives are full, or the count that you loaded into the counter is reached.
It takes a few seconds for the autoloader to recognize all the discs.
After two or three seconds of processing time, one of the following Copy Progress screens will appear.
Copying... H4012MB
0/21 12%
Copying... H4012MB
0 12%
 “H” indicates the source of the job
resides in the Hard Drive.
 “4012MB” indicates the capacity of the
master disc.
 “12%” indicates the current progress
of the duplication.
 “0/21” indicates you have a project
size of 21 copies and you have made 0
copies so far.
 “H” indicates the source of the job
resides in the Hard Drive.
 “4012MB” indicates the capacity of
the master disc.
 “12%” indicates the current progress
of the duplication.
 “0” indicates you have made 0 copies
so far.