Replacement Part List
Table Of Contents
- APGG6000 manual 1
- APGG6000 manual 2
- APGG6000 manual 7
- APGG6000 manual 8
- APGG6000 manual 9
- APGG6000 manual 10
- APGG6000 manual 11
- APGG6000 manual 12
- APGG6000 manual 13
- APGG6000 manual 14
- APGG6000 manual 15
- APGG6000 manual 16
- APGG6000 manual 18
- APGG6000 manual 19
- APGG6000 manual 20
- APGG6000 manual 21
- APGG6000 manual 22
- APGG6000 manual 23
- APGG6000 manual 24
- APGG6000 manual 25
- APGG6000 manual 26
- APGG6000 manual 27
- APGG6000 manual 28
- APGG6000 manual 29
- APGG6000 manual 30
- APGG6000 manual 32
24
Operation (cont’d)
Powering 12 Volt DC tools and Equipment:
1. Prior to powering tools and equipment, make sure the generator’s rated voltage, and amperage
capacity (12V DC) is adequate to supply all electrical loads that the unit will power. If powering
exceeds the generator’s capacity, it may be necessary to group one or more of the tools and/or
equipment for connection to a separate generator.
2. Connect the power cord of a 12V DC powered tool or equipment to the DC Terminals.
CAUTION: MAKE SURE TO CONNECT THE POSITIVE (+) LEAD OF THE
POWER CORD TO THE POSITIVE (+) TERMINAL ON THE GENERATOR,
AND CONNECT THE NEGATIVE (-) LEAD OF THE POWER CORD TO THE
NEGATIVE (-) TERMINAL ON THE GENERATOR.
THE 12V DC IS FOR BATTERY CHARGING ONLY.
Owner’s Manual