Replacement Part List

22
Owner’s Manual
Stopping Engine
2. Turn the engine switch to theSTOP” position .
3. Turn the fuel valve lever to the OFF” positio n.
When the engine is not in use, leave the fuel valve in
the OFF” position to prevent
carburetor flooding
and
to reduce the possibility of fuel leakage.
STOP
7. Move the choke lever to the “OPEN”
position.
8. Push the circuit breakers to the “ON” position.
1. Put the circuit breaker to “OFF” position.
4. Shut down the LPG cylinder fuel knob.
Note: If you need to alternate fuel, you can change-over directly the GAS-LPG fuel
switch
while the generator is running at no-load.