Replacement Part List

19
Operation (cont’d)
Starting
1. Put the engine switch on the “RUN” position.
The engine switch enables and disables the ignition
system.
STOP: To stop the engine
RUN: To run the engine
START: To Start the engine
2. The fuel valve is located under the fuel tank . When
the valve lever is in the ON position, fuel is allowed
to flow from the fuel tank to the carburetor. Be sure
to return the fuel valve lever to the “OFF” position after
stopp ing the engine.
12000W Generator
ON
OF F
3. To start a cold engine, move the choke lever to the
CLOSED position. To restart a warm engine, leave the
choke lever in the OPEN position.
The choke lever opens and closes the choke valve in
the carburetor.
The CLOSED position enriches the fuel mixture from
starting a cold engine.
The OPEN position provides the correct fuel mixture
for operation after starting, and for restar
ting a warm
engine.