Replacement Part List

Owner’s Manual

Operation

NOTE: THE PARTS LISTED ABOVE ARE HELPFUL FOR LOCATING THE

CONTROLS MENTIONED BELOW.

CAUTION: PRIOR TO FIRST USING THE GENERATOR, THE ENGINE MUST BE

FILLED WITH OIL OF A HIGH QUALITY SAE 10W-30 GRADE ENGINE OIL.

TO DO SO, UNSCREW AND REMOVE THE ENGINES OIL DIPSTICK LOCATED

AT THE BOTTOM OF THE ENGINE CRANKCASE. FILL THE ENGINES

CRANKCASE UNTIL THE OIL LEVEL IS LEVEL WITH THE UPPER MARKED

LINE ON THE DIPSTICK. THEN SCREW THE DIPSTICK BACK INTO

THE OIL FILL HOLE.

Purge button

Intake Valve

Pull Start

Oil Fill

Control Panel