Operating instructions

Owner'sManual
Troubleshooting(cont'd)
Motorwillnotrun(cont'd)
• Fuse blown or circuit breaker tripped
o Replace blownfuse or reset circuitbreaker.Do notuse fuse or circuit
breaker with higherratingthan specifiedfor your branchcircuit.
o Check for properfuse; "Fusetron" type T is acceptable.
o Check for lowvoltage and proper extensioncord size.
o Disconnect other applicationsfrom circuit.Operate compressor on a
dedicatedcircuit.
• Check valve stuckopen
o Remove and clean or replace.
• Pressurebleeder valve on pressureswitchhas notunloaded head
pressure
o Bleed line by movingpressureswitchlever to OFF positionbefore
restarting.If bleedervalve does not open, replace bleedervalve.
• Wrongwire gauge inextensioncord
./. Check for propergauge and extensioncord length.
• Looseelectricalconnections
o Contact authorizedservicecenter.
• Paintspray on internalmotor parts
Bringto servicecenterfor service. Do notoperate compressor inthe
paint sprayarea.
• Possibledefectivemotor
Bringto servicecenter for inspectionand repair.
28