User`s manual

A - 6 A - 6
INTRODUCTION
Thank you for purchasing the Type A80BDE-J61BT13 CC-Link System Local Interface Board.
Before using the equipment, please read this manual carefully to develop full familiarity with the functions
and performance of the Type A80BDE-J61BT13 CC-Link System Local Interface Board you have purchased,
so as to ensure correct use.
Please forward a copy of this manual to the end user.
CONTENTS
SAFETY PRECAUTIONS..............................................................................................................................A- 1
REVISIONS ....................................................................................................................................................A- 4
Precautions for use ........................................................................................................................................A- 5
CONTENTS....................................................................................................................................................A- 6
Manuals ..........................................................................................................................................................A- 9
How to Read the Manual ...............................................................................................................................A-10
Generic Terms and Abbreviations .................................................................................................................A-11
Product List.....................................................................................................................................................A-12
1 OVERVIEW 1- 1 to 1- 3
1.1 Features .................................................................................................................................................. 1- 1
1.2 Combinations of Boards with Existing Software .................................................................................... 1- 2
2 EMC COMMAND 2- 1 to 2- 5
2.1 Requirements for EMC Command Compliance ....................................................................................2- 1
2.1.1 EMC commands............................................................................................................................... 2- 1
2.1.2 Installation on the control panel ....................................................................................................... 2- 2
2.1.3 Cable................................................................................................................................................. 2- 3
2.1.4 Noise filter (power supply line filter)................................................................................................. 2- 5
3 SYSTEM CONFIGURATION 3- 1 to 3- 6
3.1 System Configuration for A80BDE-J61BT13......................................................................................... 3- 1
3.2 Applicable System .................................................................................................................................. 3- 2
3.3 About Ver. 1.10 ....................................................................................................................................... 3- 3
3.4 Operating Environment........................................................................................................................... 3- 4
4 SPECIFICATION 4- 1 to 4- 7
4.1 General Specification.............................................................................................................................. 4- 1
4.2 Performance Specifications .................................................................................................................... 4- 2
4.2.1 Maximum overall cable distance (for Ver. 1.00).............................................................................. 4- 3
4.2.2 Maximum overall cable distance (for Ver. 1.10).............................................................................. 4- 5
4.3 CC-Link Dedicated Cable ....................................................................................................................... 4- 6
4.4 List of Functions ...................................................................................................................................... 4- 6
4.4.1 Multiple PLC system support ........................................................................................................... 4- 7