User`s manual

7 - 17 7 - 17
MELSEC
7 UTILITY OPERATION
7.3.4 Setting the monitoring destination
Sets the network to be used for device monitoring.
Set this when starting the device monitor utility.
(1) Selecting the menu
Select [Setting] – [Network Setting] from the menu bar.
(2) Dialog box
Item Description
Channel Sets the channel to be used.
Network Setting Sets the host and other stations along with network number and station
number.
POINT
(1) To access a multiple PLC system, select other station, then enter the value of
the "logical station number" set with the CC-Link utility for the station number.
(2) Do not specify a CC-Link remote I/O station or intelligent device station as the
monitor destination.
Specifying a remote I/O station or intelligent device station generates a
corresponding error.
(3) When own station is selected in the network setting, network No. "0" and station
No. "255" are displayed as the network status.