User`s manual

7 - 14 7 - 14
MELSEC
7 UTILITY OPERATION
7.3 Device Monitor Utility
This section explains how to operate and set the device monitor utility.
POINT
In the device monitor utility, SB (link special relay) and SW (link special register) are
indicated as SM and SD, respectively.
7.3.1 Operation procedure
The following explains how to operate the device monitor utility.
· · · · · ·
Start
Set the device to be monitored.
End
See Section 7.3.4
· · · · · ·
See Section 7.3.5.
Select [Setting] - [Network setting] from the menu bar and
set the channel to be used.
· · · · · ·
See Section 7.3.2,
7.3.3, 7.3.6 to 7.3.11
Change the monitoring method, device value or display
format as necessary.