User`s manual

3 - 3 3 - 3
MELSEC
3 SYSTEM CONFIGURATION
3.3 About Ver. 1.10
A product with a cable length of 20cm or longer between stations, which has been
achieved by improving the restriction on the conventional cable distance between the
stations, is defined as Ver. 1.10.
Whereas, the conventional product is defined as Ver. 1.00.
For the maximum total cable length for the Ver. 1.10 products, see Section 4.2.2.
The conditions requiring the cable length to be 20cm or longer between stations are as
follows:
1) All the units comprising a CC-Link system must be of Ver. 1.10.
2) All the data link cables must be Ver. 1.10-compatible CC-Link dedicated cables.
POINT
If modules of Ver. 1.00 and Ver. 1.10 are mixed in a system, the maximum total
cable length and the cable length between stations will be as specified by Ver.
1.00.
For the maximum total cable length and the cable length between stations for the
Ver. 1.00 products, see Section 4.2.1.
(1) How to check Ver. 1.10
Ver. 1.10-compatible CC-Link boards and modules contain a "CC-Link" logo on
the "board" or "rating name plate."
(Example) Rating name plate of AJ61BT11
PROGRAMMABLE CONTROLLER
DATE
MADE IN JAPAN BD992C077H01