User`s manual

A - 10 A - 10
How to Read the Manual
"How to Read the Manual" is listed according to the objective when using the CC-Link board.
Refer to the following when using this manual.
(1) To learn about the features of the CC-Link board (Section 1.1)
The features are described in Section 1.1.
(2) To learn about compatibility with existing software (Section 1.2)
Compatibility with existing software is described in Section 1.2.
(3) To learn about the correspondence to the EMC command
(Chapter 2)
Correspondence to the EMC command is described in Chapter 2.
(4) To learn about the system configuration (Section 3.1 to
Section 3.2)
Configuration of a system using the CC-Link board is described.
(5) To learn about the operating environment for the CC-Link board
(Section 3.3)
The operating environment for the CC-Link board is described in Section 3.3.
(6) To learn about specifications and functions for the CC-Link board
(Chapter 4)
The specifications and functions for the CC-Link board are described in
Chapter 4.
(7) To learn about CC-Link board settings (Chapter 5)
CC-Link board settings are described in Chapter 5.
(8) When installing or uninstalling a software package (Chapter 6)
How to install and uninstall a software packaged is described in Chapter 6.
(9) To learn about utilities operating procedure (Chapter 7)
The operating procedure for utilities is described in Chapter 7.
(10) To learn about devices that can be accessed and range of access
(Chapter 8)
Device specifications and contents stored in the system-area information are
described in Chapter 8.
(11) To learn about how to use functions (Chapter 9)
How to use functions is described in Chapter 9.
(12) To learn about error contents (Chapter 10)
The contents of errors is described in Chapter 10.
(13) To learn about the actions to take when the system does not run
(Chapter 11)
How to troubleshoot is described in Chapter 11.