User`s manual

11 - 15 11 - 15
MELSEC
11 TROUBLESHOOTING
11.5.4 Flowchart to use when the system goes down or resets during the user program
execution
START
NO
YES
NO
YES
YES
NO
NO
YES
NO
YES
1)2)
Remove all optional boards and restart.
Did the operating system
start normally?
After formatting the hardware, reinstall
Windows NT 4.0, Windows 95/98 and
each application software, then reboot.
Did the operating system
start normally?
Did the operating system
start normally?
Contact the PC manufacturer.
Install the A80BDE-J61BT13 only, then
install the software package.
Section 11.3 Flowchart to use when
the PC and board do not operate
Change the user program in which the
error occurred and create a program
that is valid only in the areas of
communication functions. Execute the
program continuously for a sufficient
period.
Did the same error
occur again?
Check Section 11.8, "Information
Needed when Calling with Inquiry", then
consult with a dealer.
If other optional boards have been used,
load the additional boards.
Did the same error
occur again?
1) Check the settings for the added
optional board.
2) Replace the added optional board.