User`s manual

11 - 4 11 - 4
MELSEC
11 TROUBLESHOOTING
YES
NO
NO
YES
NO
NO
YES
YES
NO
YES
1)
2)
END
END
Is there a driver
message in the control tool
event viewer? 1
Start the monitor function (utility).
Check switching settings, etc.
according to the error contents in
the event viewer.
Did the monitor
function (utility) start
normally?
Remove any other optional
boards and leave only the
A80BDE-J61BT13 in.
Did the monitor function
(utility) start normally?
Are the
correct numbers
of A80BDE-J61BT13 that
have been loaded
displayed?
Check the I/O, IRQ and memory
address settings for other optional
boards.
END
Is everything OK?
Replace the PC.
Check the following items.
(1) For Windows 95 and Windows 98, check that the driver for
PCI bus control included with the computer is in use. Also, check
that it is operating correctly.
(2) Check that other drivers, such as the USB driver, are operating
correctly.
(3) Set the I/O, IRQ, and memory address of the A80BDE-J61BT13
to values different from the other drivers such as the USB driver,
and check whether operation is correct.
YES
R R
NO
Replace the A80BDE-J61BT13.
Is everything OK?
1 : With Windows
R
95 and Windows
R
98, check the driver message in the error
viewer.