Technical data

Fieldbus coupler/controller • 65
Fieldbus coupler 750-310
WAGO-I/O-SYSTEM 750
CC-Link
3.1.8 Technical Data
System data
Remote station number 1 to 64
Transmission medium Twisted pair cable with shield
Baud rate 156Kbps, 625Kbps, 2,5Mbps, 5Mbps, 10Mbps
Max. length of bus line
(depending on baud rate)
100
10M
150
5M
200
2,5M
600
625K
1200
156K
m
bps
Buscoupler connection 9-pole female Sub-D connector
Terminal resistor 110 ! / 130 ! (Connect between DA and DB at
modules at both ends)
Standards and approvals
UL E175199, UL508
E198726, UL1604
Class I Div2 ABCD T4A (requested)
KEMA 01ATEX1024 X
EEx nA II T4 (requested)
Certification CLPA (in preparation)
Conformity marking CE
Accessories
Miniature WSB quick marking system
Technical data
Max. number of I/O modules 64
Input address area 16 bits system data, max. 112 bits user data digital,
max. 16 words user data analog
Output adress area 16 bits system data, max. 112 bits user data digital,
max. 16 words user data analog
Configuration (initial data) via PC or PLC as master station
Voltage supply DC 24 V (-15 % / + 20 %)
Current consumption
- via power supply terminal < 500 mA at 24 V
Efficiency of the power supply
Internal power consumption
Total current for I/O modules
Isolation 500 V system/supply
Voltage via power jumper contacts DC 24 V (-15 % / + 20 %)
Current via power jumper contact
max
DC 10 A
Dimensions (mm) W x H x L 51 x 65* x 100 (*from top edge of mounting rail)
Weight ca. 195 g
EMC interference resistance acc. EN 50082-2 (95)
EMC interference transmission acc. EN 50081-2 (94)