Technical data

56 • Fieldbus coupler/controller
Fieldbus coupler 750-310
WAGO-I/O-SYSTEM 750
CC-Link
3.1.4.5 Example
In this example the remote station consists of :
1 x 750-310 CC-Link coupler,
3 x 750-402 4-channel digital input modules (DI),
4 x 750-504 4-channel digital output modules (DO)
2 x 750-467 2-channel analog input modules (AI)
1 x 750-550 2-channel analog output module (AO)
1 x 750-600 bus terminator
Input process image:
Byte .7 .6 .5 .4 .3 .2 .1 .0
0
Analog input module 1, channel 1, low byte
1
Analog input module 1, channel 1, high byte
2
Analog input module 1, channel 2, low byte
3
Analog input module 1, channel 2, high byte
4
Analog input module 2, channel 1, low byte
5
Analog input module 2, channel 1, high byte
6
Analog input module 2, channel 2, low byte
7
Analog input module 2, channel 2, high byte
8
DI2C4 DI2C3 DI2C2 DI2C1 DI1C4 DI1C3 DI1C2 DI1C1
9
DI3C4 DI3C3 DI3C2 DI3C1
i.e DI1C1 means Digital Input module 1, channel 1
Output process image:
Byte .7 .6 .5 .4 .3 .2 .1 .0
0
Analog output module 1, channel 1, low byte
1
Analog output module 1, channel 1, high byte
2
Analog output module 1, channel 2, low byte
3
Analog output module 1, channel 2, high byte
4
DO2C4 DO2C3 DO2C2 DO2C1 DO1C4 DO1C3 DO1C2 DO1C1
5
DO4C4 DO4C3 DO4C2 DO4C1 DO3C4 DO3C3 DO3C2 DO3C1
i.e DO1C1 means Digital Output module 1, channel 1
This node occupies 1 station address at the CC-Link bus if the address mode is
set to Auto address mode.