Technical data

Fieldbus coupler/controller • 49
Fieldbus coupler 750-310
WAGO-I/O-SYSTEM 750
CC-Link
3.1.4.3 Data Exchange
After mapping the I/O-data of the bus modules to the local process image the
coupler cyclically transfers the digital input data from the process image to the
Remote I/O area and the analog input data to the Remote Register area. In the
same way the digital output data from the Remote I/O area and the analog out-
put data from the Remote Register area to the are transferred to the process
image.
Fig. 3-9:Data transfer g013908e
3.1.4.4 Data Allocation of I/O-Modules
Note
For the number and meaning of input and output bits or bytes of the individual
I/O modules please refer to the corresponding I/O module description.
The index k in the following tables points to the next free Link input/output or
Link register (read/write).