Instruction manual

Installation Overview
CC/CCS Power Conditioner User Manual 3
5. Turn on the input circuit breaker.
6. Verify the correct operation of the power
conditioner (see
Verifying Your
Installation on page 4).
7. Turn off the input circuit breaker. Connect
your equipment to the output (see
Output
Connections on page 8). On hardwire
units, the use steel or flexible wall conduit
with a continuous copper ground is
recommended.
8. Turn on the input circuit breaker.
9. Turn on your equipment.
10. Start normal operation of your system.
Important
Installation
Guidelines
Only qualified electricians should install or
retrofit this ONEAC power conditioner.
WARNING : This power conditioner contains
dangerous voltages. Accidental contact can
result in serious electrical shock. Always follow
the US National Electrical Code or your local
electrical codes and good wiring practice.
WARNUNG: Dieses
Leistungsanpassungsgerät führt
lebensgefährliche Spannung.
Stromschlaggefahr! Bitte beachten Sie die in
Ihrem Land geltenden Vorschriften über die
Verdrahtung und Beschaltung.
This power conditioner is a single phase unit.
The secondary is wired as a single phase or in
some models, as a split phase output
configuration as shown below.
The input requires an equipment grounding
conductor connection. The use of steel or