Manual

33
EN
Problems Possible causes Solutions
E0 is displayed on screen Lid temperature sensor is faulty. Send to repair and maintenance department.
E1 is displayed on screen Bottom temperature sensor is faulty. Send to repair and maintenance department.
E2 is displayed on screen. Lid is not locked.
Check if the selected program requires the
lid totally closed. If yes, completely lock the
lid. If not, send to repair and maintenance
department.
E5 is displayed on screen. Abnormal low pressure.
Check that the gasket is properly installed and
cleaned. Chech that the pressure limit valve
falls down into place and is cleaned. Check that
the lid xing nut is well tightened.
Steam leaking from lid.
e sealing gasket was not properly
installed.
Remove the gasket, clean it and reinstall the
sealing gasket properly, in the correct position.