User's Manual

Operation Instruction
1:Turn on the Device & the Shaker
Connect the micro USB power cord with a 5V power adapter(Not
included) and push the micro USB terminal into the power input
port on the back of the device or install 3 AAA batteries(not
included). On battery mode, USB charging function can not work
and the LED display will turn to standby mode in 10 seconds.
Install 3 AAA batteries (not included) into the shaker to turn on the
shaker. The shaker is on when it vibrates a second. It will connect
with the device automatically as the shaker is paired with the
device before it leaves the factory. If fail to connect with the device,
please refer to the label on the bottom of the device.
2:Time Setting
Press TIME button on the back of the device, the time figure
begins to flash. Press+/-to select time by minute; Press and hold
+/- to select time quickly(Recommended). Press TIME button to
confirm time setting(If no operation on any keys in 10seconds, it
will confirm the setting and exit automatically ).
3:12H/24H Mode
Use the 12H/24H switch behind the unit to select 12 hour or 24
hour display. On 24H mode, AM or PM will display on the screen.
4:Alarm Setting
Press button to set alarm. 12:00 and the alarm icon begin to
flash on the screen. Press +/- button to select time by minute. Or
press and hold +/- button to select time quickly(Recommend).
Then press button to confirm the setting. The alarm icon will
stop flashing automatically in 10 seconds if no operation occurs.
If the alarm is not cancelled, the alarm works everyday.
- 6 -