User's Manual

4
5
5. Operating Instruction
5.1 Power ON
Connect the power adaptor into the jack on the back of S1 labeled
“DC”, and then plug the power adaptor into the wall outlet. The LCD
display turns on. Press to turn on the unit.
5.2 Set Time
Under any mode, press “Time” to set time. Press “+” or “-” to switch
the Hour mode between 12-Hour and 24-Hour. Press “Time” to
confirm it. Then Hour figure and MINUTE figure begin to flash. Press
“+” or “-” to adjust the HOUR and press “Time” to confirm it, then press
“+” or “-” to adjust the MINUTE and press “Time” to confirm the setting.
It exits the setting in 10seconds if no operation on any key.
5.3 Set Alarm Time
Under any mode, press to enter alarm time setting, icon displays
in the LCD. Press some times to display OFF/BU. (OFF- none alarm
is selected). When BU icon appears, press “SET/MODE” to enter alarm
time setting. The HOUR figure begins to flash, then press “+” or “-” on
the top side of the unit to adjust the figure; Press “SET/MODE”, the
MINUTE figure begins to flash. Press “+” or “-” to adjust the figure. It