User Manual 1 %OXHWRRWK 6SHDNHU 6\VWHP ZLWK $ODUP &ORFN
Thank you for purchasing S1. S1lets you create the perfect sleeping and waking environments and enjoy outstanding audio performance throughour the day.With S1 userfriendly controls you can simply set the clock and alarm time, or customize everything from the display brightness to the snooze timer, keep it simple,this manual will show you how to do just that.
1. Product Features ……………………………………………………1 2. What is included………………………………………………………1 3. Specification Parameters…………………………………………… 2 4. Diagram of the LCD Display & the Buttons……………………… 3 5. Operating Instruction…………………………………………………5 5.1 Power ON……………………………………………………………5 5.2 Set Time………………………………………………………………5 5.3 Set Alarm Time………………………………………………………5 5.4 Alarm Function………………………………………………………6 6. SLEEP Function under ON Model…………………………………6 7. Play Music from Mobile via Bluetooth………………………………7 7.
1. Product Features (1) Elegant and fashionable design; simple setting (2) Built-in Microphone, having clear hands-free calls (3) 3.2 inch LCD display (4) 3.5mm audio jack for connecting other audio sources (5) Built-in high quality loudspeaker (6) USB port for charging iPone/iPod/iPad/Mobiles (7) Dual Alarms 2.
3. Specification Parameters - Bluetooth Version: 2.1+EDR - Bluetooth Profiles: A2DP, AVRCP, HFP, HSP - Receive range: within 10 meters - Operation Voltage: DC 5V 3A -- Audio OutputOutput Power:Power: 3W + 3W + 3W - Driver Unit: 4Ą 3W 1.5in - Frequency range: 40Hz-20KHz - S/N Ratio: >65dB - Distortion Rate: <1% - USB Port: DC 5V 1A - Product Net Weight: 0.
4.
%XWWRQ )XQFWLRQ 3RZHU 21 2)) 6122=( 0LQXWH 6ZLWFK 0RGHV $ODUP 7LPH 6HWWLQJ 7LPH 6HWWLQJ RI $ODUP 7LPH 6HWWLQJ RI $ODUP 9ROXPH GRZQ $GMXVWLQJ $ODUP 7LPH 6NLS %DFNZDUGV ODVW 6RQJ %OXHWRRWK 3OD\ 3DXVH $QVZHU WKH SKRQH DQG +DQJ XS 6NLS )RUZDUGV QH[W 6RQJ 9ROXPH XS $GMXVWLQJ $ODUP 7LPH SNOOZE | DIMMER 6122=( 'LVSOD\ %ULJKWQHVV /HYHO /HYHOV 4
5. Operating Instruction 5.1 Power ON Connect the power adaptor into the jack on the back of S1 labeled “DC”, and then plug the power adaptor into the wall outlet. The LCD display turns on. Press to turn on the unit. 5.2 Set Time Under any mode, press “Time” to set time. Press “+” or “-” to switch the Hour mode between 12-Hour and 24-Hour. Press “Time” to confirm it. Then Hour figure and MINUTE figure begin to flash.
will exit the setting in 5 seconds if no operation on any key. $ODUP 5LQJ 6RXUFH %8== $ODUP 2)) 5.4 Alarm Function 1) When alarm1 is on, icon is flashing in the LCD and the alarm ring tone is becoming larger and larger. Press “SNOOZE” to activate the Snooze function. SNOOZE icon appears in the LCD. Alarm will be on again in 9-minute snooze. The alarm can last for 30minutes at most if no button is pressed (including snooze time). 2) To stop alarm, press or . Alarm 1 is one-off alarm.
7. Play Music from Mobile via Bluetooth 7.1 Operation Press “MODE” to choose Bluetooth mode. Go to mobile settings, turn on Bluetooth and search Bluetooth devices. Connect “Smart one”. When it is successfully paired, you will hear a sound of “DU”. Play music from your mobile now. (When Bluetooth is connected, press “Mode” to switch it to other mode, Bluetooth will be OFF automatically and get disconnected with mobile. When switching it to Bluetooth mode again, connect “Smart one” manually or automatically.
8. Play Music from Aux Jack Press “MODE” to switch the mode to AUX IN, pug in the 3.5mm audio cable into the AUX IN jack. Play music now. AUX IN TIME DC 5V 9. Back-up Button Battery The 3V button battery is to retain the alarm/clock setting in case of a power failture. It can not display the alarm/clock time.
FCC STATEMENT： This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
