User Manual S1-BT Bluetooth Alarm Clock Speaker
1. Product Features ……………………………………………………1 2. What is included………………………………………………………1 3. Specification Parameters…………………………………………… 2 4. Diagram of the LCD Display & the Buttons……………………… 3 5. Operating Instruction…………………………………………………5 5.1 Power ON……………………………………………………………5 5.2 Set Time………………………………………………………………5 5.3 Set Alarm Time………………………………………………………5 5.4 Alarm Function………………………………………………………6 6. SLEEP Function under ON Model…………………………………6 7. Play Music from Mobile via Bluetooth………………………………7 7.
1. Product Features (1) Elegant and fashionable design; simple setting (2) Bluetooth speakerphone for conference calls (3) 3.2 inch LCD display screen (4) FM Digital Radio (5) 3.5mm audio jack for connecting other audio sources (6) Stereo speaker, providing superior quality sound (7) USB port allows for traditional USB Charging for most devices on the market (8) Dual Alarms 2.
3. Specification Parameters - Bluetooth Version: CSR 3.0+EDR - Bluetooth Profiles: A2DP, AVRCP, HFP, HSP - Receive range: Up to 10 meters - Operation Voltage: DC 5V 1.5A - Output Power: 3W + 3W - Driver Unit: 4Ω 3W 2 in - Frequency range: 40Hz-20KHz - S/N Ratio: >65dB - Distortion Rate: <1% - FM Frequency Range: 87.5 ~ 108MHz - USB Port: DC 5V 1A - Product Net Weight: 0.
4.
SNOOZE | DIMMER Button Function Power ON/OFF SNOOZE 90-80-70-60-50-40-30-20-10-00 Minute Switch Modes; Alarm Time Setting Time Setting of Alarm1 Time Setting of Alarm 2 Volume down/ Adjusting Alarm Time Skip Backwards last Song Bluetooth, Play/Pause, Answer the phone and Hang up/Auto Scan FM Station Skip Forwards next Song Volume up/ Adjusting Alarm Time SNOOZE | DIMMER SNOOZE, Display Brightness Level (3Levels: 1-2-3) 4
5. Operating Instruction 5.1 Power ON Connect the power adaptor into the jack on the back of S1 labeled “DC”, and then plug the power adaptor into the wall outlet. The LCD display turns on. Press to turn on the unit. 5.2 Set Time Under any mode, press “Time” to set time. Press “+” or “-” to switch the Hour mode between 12-Hour and 24-Hour. Press “Time” to confirm it. Then Hour figure and MINUTE figure begin to flash.
will exit the setting in 5 seconds if no operation on any key. Alarm Ring Source - BUZZ Alarm OFF 5.4 Alarm Function 1) When alarm1 is on, icon is flashing in the LCD and the alarm ring tone is becoming larger and larger. Press “SNOOZE” to activate the Snooze function. SNOOZE icon appears in the LCD. Alarm will be on again in 9-minute snooze. The alarm can last for 30minutes at most if no button is pressed (including snooze time). 2) To stop alarm, press 3) Setting Alarm or .
7. Play Music from Mobile via Bluetooth 7.1 Operation Press “MODE” to choose Bluetooth mode. Go to mobile settings, turn on Bluetooth and search Bluetooth devices. Connect “ MUANGTHAI”. When it is successfully paired, you will hear a sound of “DU”. Play music from your mobile now. (When Bluetooth is connected, press “ Mode ” to switch it to other mode, Bluetooth will be OFF automaticallyand get disconnected with mobile.
8. FM Radio Operation Switch the unit to FM mode, Press and Hold /scan to auto scan radio station and store the scanned stations accordingly. The frequency starts from 87.5MHz to 108MHz and skips at every 0.1 MHz in scanning process. Once catching a station, it stops a second and store it, then continues the auto-scanning. When it scans from 87.5MHz to 108MHz or stores 20 stations, it will stop scan automactically. Press or to select the station. 9.
10. Back-up Button Battery The 3V button battery is to retain the alarm/clock setting in case of a power failture. It can not display the alarm/clock time.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.