User`s guide

PC*MILER-AS400 User’s Guide 26
0 Connection Good Created Data Queue
2 Connection Good Found Data Queue
Return codes of 1 or 3 are generic error codes that indicate problems with
your Client Access Express connection.
NOTE: Both the PC and the AS400 must agree on the location of the
Input or Request data queue. To change the location on the PC, click on
the mileage server’s File menu. Choose AS400 Control, then Change
Library/Queue. The change is made on the AS400 by running the
alkwin/config or alktll/tllfig command and filling out the library field.
The server log only notes incoming requests. If you need to see the
mileage server’s outputs, turn on the Log to File feature by selecting the
mileage server’s File menu and choosing AS400 Control > Log to File and
highlight Append, Overwrite or Verbose (see below). This will create the
file c:\ALK Technologies\pcmiler28\as400\as400.log. It is
recommended to only use logging for diagnostic purposes, otherwise the
log files tend to grow large.
 Append will add to the existing as400.log file after restarts.
 Overwrite will delete the existing as400.log file after restarts.
 Verbose logging includes information from the data queue
communications. Verbose logging Appends after restarts.
4.2 Stopping the Interface
From the PC*MILER-AS400 window, choose Exit from the File menu.
NOTE: If you are closing your router, remember to disconnect the
AS400 beforehand. Please be patient, the PC*MILER mileage server can
take a minute or two to exit. Be sure to disconnect the Netsoft Router
from the AS400 before closing the router. Failure to do so may result in
having to reboot the PC before you can reconnect to the AS400. It is not
necessary to manually disconnect a Client Access Express connection.