User`s guide

PC*MILER-AS400 User’s Guide 12
Make sure all objects were restored. You can ignore security warning
messages. It is okay if MIDQUE does not restore because this file is
created later on.
NOTE: The ALKWIN [or ALKTLL] Library CD was created using Kisco
Information Systems’ BlueCD, which allows you to create AS400
readable SAVLIBs on a PC CD writer. A small percentage of users
may have difficulty restoring the ALKWIN [or ALKTLL] Library with the
above command. If you experience problems.
Type RSTLIB, then:
a. Specify the library ALKWIN [or ALKTLL] and the appropriate
optical device
b. Press <F10> for more options
c. Specify *ALL on database member options
d. Specify *ALL
on allow object differences.
4. The system administrator should make the library ALKWIN or ALKTLL
available to users at sign-on time. There are two ways to insert
ALKWIN [or ALKTLL] into the library list:
a. The WRKSYSVAL command can be used by typing
WRKSYSVAL, and then searching for the QUSRLIBL entry.
Insert ALKWIN [or ALKTLL].
b. If your users are using a job description in their user profiles,
then use the CHGJOBD command (type CHGJOBD) and insert
ALKWIN or ALKTLL.
For Innovative Computing installations, a command is available to help
insert a library into the library list. ALKWIN should be the first library
in the library list. (NOTE: Run this command from a typical ICC
user account or profile, not QSECOFR). Enter the following:
ADDLIBLE ILPGMR *LAST
CHGLIBLS
(insert) ALKWIN [or ALKTLL]
5. To grant object authority to library ALKWIN, enter the following:
GRTOBJAUT (press <F4>)
object = *ALL
library = ALKWIN [or ALKTLL]
objtype = *ALL
users = *public
authority = *ALL