User`s guide

PC*MILER-AS400 User’s Guide 98
Appendix B: Configuring an N/S Router For Use With
PC*MILER-AS400
ALK is no longer supporting the use of the N/S Router. It remains an
installation option and may work on some systems.
Unless you have a twinax connection, configure your router using the
AnyNet protocol. AnyNet needs to be enabled on the AS400 (see
Appendix D: Configuring AnyNet on the AS400).
For PC*MILER Version 14 (or higher) and any PC*MILER|Streets version,
you must have the N/S Router version 3.0 or higher.
Check by selecting HELP > About in the NS/Administrator or the
midrange workspace.
NOTE: If you need to upgrade your NS Router, you must reinstall the
PC*MILER-AS400 interface afterwards. The PC*MILER interface is built
on a specific Netsoft Data Queue DLL that is available only on the
PC*MILER interfaces CD.
To start the configuration, go to the N/S Administrator, right click on the
N/S Router, and choose Properties.