User`s guide

PC*MILER-AS/400 MVS User’s Guide 82
Appendix F: Multi-Version Switch INI Settings
PC*MILER-AS/400 Multi-Version Switch uses multiple INI files.
AS400.exe uses Srv32.INI and Pcmmv.INI.
Each instance of PC*MILER|TCP/IP uses its own Pcmserve.INI.
Srv32.INI is used for startup information. Pcmmv.INI is used to store the
locations of your various instances of PC*MILER|TCP/IP.
Srv32.INI and Pcmmv.INI have to be kept in synch at all times. Changes to the
values under the [MultiVersion] Key in Srv32.INI have to be mirrored in Key
names in Pcmmv.INI.
For example, from Srv32.INI:
[MultiVersion]
Product0=PCMiler 160  Maps to [PCMiler 160] in Pcmmv.INI
Product1=PCMiler 170  Maps to [PCMiler 170] in Pcmmv.INI
Product2=PCMiler 180  Maps to [PCMiler 180] in Pcmmv.INI
Product3=PCMiler 190  Maps to [PCMiler 190] in Pcmmv.INI
In Pcmmv.INI:
[default]
product=PCMiler 160 This must match one of the Products listed above.
The default instance of PC*MILER|TCP/IP is only used if a mileage request has
no version specified (blanks in MVS parameter). An error will be returned for any
other invalid version request.
SRV32.INI Explained:
[Defaults]
; Default values: valid values are listed after the description
; Leave values blank to use the following internal defaults:
; CalcType=Practical  Route Type
; Units=Miles  Distance Units Miles or Kilometers
; ChangeDest=TRUE  Route Through All on Trip Resequence
; HubMode=FALSE  Lock in Hub mode. (Use with Caution)
; AlphaOrder=TRUE  List States alphabetically vs. driving order in reports.
; IP Address or System Name of AS/400
system=
;User Profile
user=
;Password
pass=express