User`s guide

PC*MILER-AS/400 MVS User’s Guide 70
Appendix B: Configuring an N/S Router For Use With
PC*MILER-AS/400
Unless you have a twinax connection, configure your router using the AnyNet
protocol. AnyNet needs to be enabled on the AS/400 (see Appendix D:
Configuring AnyNet on the AS/400).
For PC*MILER Version 14 (or higher) and any PC*MILER|Streets
version, you
must have the N/S Router version 3.0 or higher.
Check by selecting HELP > About in the NS/Administrator or the midrange
workspace. NOTE: If you need to upgrade your NS Router, you must reinstall
the PC*MILER AS/400 interface afterwards. The PC*MILER interface is built
on a specific Netsoft Data Queue DLL that is available only on the PC*MILER
interfaces CD.
To start the configuration, go to the N/S Administrator, right-click on the N/S
Router, and choose Properties.