User`s guide

PC*MILER-AS/400 MVS User’s Guide 57
Examples
Warminster,PA,BUCKS
Warminster,PA;1174 NASSAU ROAD
18974
Lat/long format should be 1234567N,1234567W
5 digit zips only
Canadian Postal Codes use the format L#L #L#
NOTE: REQ-SEQ is not read for SM requests.
REQ-BRDR and REQ-FERRY values are not echoed back in the PC responses.
2. (Response) The following are field parameters for the state miles output. The
PC will respond with the miles (or kilometers) for the stops indicated in the "SM"
request. There will be 10 state miles returned for each record. If additional
records are needed, an "M" in the "MORE" parameters field is used to indicate
that there is more data to follow.
NOTES: A “CP” (city pair, point-to-point miles) response is always returned
first for all three request types (MI, SM, and HS), and an "SR" (state miles) output
record follows the “CP” response to an "HS" (highway system, detailed route
information) request (see section 8.2.4).
Response from PC Len Value Description
REQTYPE 2 SR State miles summary
REFNUM 10 Output Queue Name
(ALK uses ‘Q’ + the job number)
Request Options 13-22
PARMS 1 Pos 1) S=Shortest
P=Practical
N=National/Practical
T=Toll Discouraged/Practical
5=53’ Trailer/Practical
B=Toll Discouraged/Practical
C=National Network/Practical
D=53 Foot Trailer/Practical
E=Toll Discouraged/National Network/Practical
F=Toll Discouraged/53 Foot Trailer/Practical
G=Toll Discouraged/Shortest
H=National Network/Shortest
I=53 Foot Trailer/Shortest
J=Toll Discouraged/National Network/Shortest
K=Toll Discouraged/53 Foot Trailer/Shortest
1 Pos 2) M or K for miles or kilometers
1 Pos 3) R = resequence stops
H = hub leg miles
F = resequence stops fixed destination
blank = otherwise
RESP-MORE 1 Pos 4) M = more data to follow
1 Pos 5) Reserved by DR request
RESP-FMT 1 Pos 6) E = Extended Format
(Required, see Appendix A)