User`s guide

PC*MILER-AS/400 MVS User’s Guide 49
8.2 Request and Response Field Parameters
The following sections specify the field parameters for the request types defined
in section 8.1 and the responses to each request type.
IMPORTANT NOTE: When using PC*MILER|Streets, the best matching for
address location lookups can be accomplished using the guidelines stated below.
These rules apply to batch or interactive integration. It is recommended that a
validation (VA) request always precede each mileage request, especially
where street addresses are included, in order to avoid misleading or incomplete
output.
 When you input a street address, use a city and state abbreviation
whenever possible.
Example: Princeton, NJ;1000 Herrontown Road – The comma between
the city and state is optional. The semicolon between the state abbreviation
and the street address is required.
 Use a street number.
Example: Princeton, NJ;1000 Herrontown Road as opposed to
“Princeton, NJ;Herrontown Road”. In this example, if Herrontown Road
is 50 miles long and no address is included, the returned mileage could be
very inaccurate.
 When a street address is not supplied, do not send a semi-colon.
Example: Send 08540 as opposed to “08540;” – a semi-colon will cause
the server to look up a blank address which is not necessary.
Three examples of correct input:
Trenton, NJ;21 Olden Avenue
New York, NY;118 Broadway
20001