User`s guide

PC*MILER-AS/400 MVS User’s Guide 24
Product9=PCMiler 20U
Product10=PCMiler 21T
Product11=PCMiler 22T
Product12=PCMiler 23T
Product 13=PCMiler 24T
Product 14=PCMiler 25T
Product 15=PCMiler 26T
Product 16=PCMiler 27T
NOTE on Version Format: These values must match those in your Pcmmv.ini
file – See Version-Specific Routing and City Format Information in Chapter 8.
They are case sensitive. Letters must be capitals. Use ‘W’ for Worldwide
versions, ‘T’ for Tolls .0 versions and ‘U’ for Tolls .1 versions.
NOTE: Product0 is the default version of PC*MILER that will be used by the
PC Distance Server (as400.exe) if the PC*MILER version is not otherwise
specified in the individual request made to the Server.
NOTE: There can be no gaps in the Product count. You can not delete or
comment out unneeded versions without renumber the product count integers so
that there are no gaps in the numbering sequence.
If you redirected the ‘Unzip to Folder’ in Step 3.1 you will have to edit your
DllPath key value as well.
Save your changes and exit srv32.ini.
Step 4.2: Edit \AlkMvs\pcmmv.ini or \AlkToll\pcmmv.ini
NOTE: The default value included in pcmmv.ini is not used by the Distance
Server.
[default]
product=PCMiler 260
NOTE: The product key value has to match one from the [Multiversion] section
of your Srv32.ini as detailed in Step 4.1. You must maintain case sensitivity.
Srv32.ini Pcmmv.ini
Product7=PCMiler 19T [PCMiler 19T]
Product8=PCMiler 200 [PCMiler 200]
Values after the equal sign (=) from the [MultiVersion] section of Srv32.ini must
exactly match the values between the square brackets in Pcmmv.ini.