User`s guide

PC*MILER-AS/400 MVS User’s Guide 19
The currently-supported versions of PC*MILER products are:
PC*MILER 14.x PC*MILER|Tolls 21.x
PC*MILER 15.x PC*MILER|Tolls 22.x
PC*MILER 16.x PC*MILER|Tolls 23.x
PC*MILER 17.x PC*MILER|Tolls 24.x
PC*MILER 18.x PC*MILER|Tolls 25.x
PC*MILER 19.x PC*MILER|Tolls 26.x
PC*MILER 20.x PC*MILER|Tolls 27.x *
PC*MILER 21.x PC*MILER|Worldwide 18.1
PC*MILER 22.x PC*MILER|Worldwide 19.1
PC*MILER 23.x PC*MILER|Worldwide 20.1
PC*MILER 24.x PC*MILER|Worldwide 21.1
PC*MILER 25.x PC*MILER|Worldwide 22.1
PC*MILER 26.x PC*MILER|Worldwide 23.1
PC*MILER 27.x * PC*MILER|Worldwide 24.1
ALK|FleetSuite Tolls 18 PC*MILER|Worldwide 25.1
ALK|FleetSuite Tolls 19 PC*MILER|Worldwide 26.1
ALK|FleetSuite Tolls 20.x PC*MILER|Worldwide 27.1 (Fall 2013)
* PC*MILER 27.1 and PC*MILER|Tolls 27.1 are supported upon their release in
Fall 2013
2) For PCs previously used for PC*MILER products, check the \Winnt or
\Windows folder for old dll’s and INI files (see file list in Step 4.6 at the end of
this chapter).
3) Install the correct version of PC*MILER|TCP/IP for each version of
PC*MILER that you will be using. Pay strict attention to which version you
are installing.
4) Install PC*MILER-AS/400 Multi-Version Switch (ALKMVS.exe or
ALKTOLL.exe or similar) by following the steps below:
Step 1:
Make sure that Client Access Express is installed and working on the PC (see Appendix
D: Confiquring Client Access Express for Use with PC*MILER AS/400).
IMPORTANT NOTE for NS Router Users: PC*MILER for the AS/400 is built
on a specific Netmanage Data Queue DLL. This DLL, E32DQW.DLL dated
12/18/98, is only on the PC*MILER CD. If you install any Netmanage software
after installing the PC*MILER for the AS/400 interface software, you run the risk