User`s guide

PC*MILER-AS/400 MVS User’s Guide 15
a. The WRKSYSVAL command can be used by typing
WRKSYSVAL, and then searching for the QUSRLIBL entry. Insert
ALKMVS.
b. If your users are using a job description in their user profiles, then use
the CHGJOBD command (type CHGJOBD) and insert ALKMVS or
ALKMTL.
For Innovative Computing installations, a command is available to help insert
a library into the library list. ALKMVS should be the first library in the
library list. (NOTE: Run this command from a typical ICC user account
or profile, not QSECOFR.) Enter the following:
ADDLIBLE ILPGMR *LAST
CHGLIBLS
(insert) ALKMVS or ALKMTL
4. To grant object authority to library ALKMVS, enter the following:
GRTOBJAUT (press <F4>)
object = *ALL
library = ALKMVS or ALKMTL
objtype = *ALL
users = *public
authority = *ALL
NOTE: For ICC Users only (Be sure to do this!) Type the ‘mvsfig’ or
‘mtlfig’ command from the AS/400 command line after the restore of the
library, then change the library for the location of mileage data queues
from ALKMVS to your ICC Work library and change the ICC Support
Short Code names flag from ‘N’ to ‘Y’. Depending on the version of
your ICC software, your library will be I93WORK, ITSR6WORK, or
IESR7WORK. Check with ICC for this name.
NOTE Also: The AS/400 side and the PC Side must match which library
the Mileage Request or input data queue resides in. You will be prompted
during the PC Side Installation for your data queue location, or there is an
option to change it in the mileage server window (File > AS/400 Control > Data
Queue Library).