User`s guide

PC*MILER-AS/400 MVS User’s Guide 14
1. Create a library with the CRTLIB command. Type CRTLIB ALKMVS or
ALKMTL for Tolls.
2. Add the library to the current library list. Type ADDLIBLE ALKMVS or
ALKMTL for Tolls.
For Innovative Computing Corporation installations, you will also need your ICC
WORK and FILE libraries in your current library list. For Version R6, type
ADDLIBLE I93FILE or ITSR6FILE and then ADDLIBLE I93WORK or
ITSR6WORK. The ICC Version 7 libraries are IESR7WORK and IESR7FILE.
(Call ICC if you don’t know which version you are running.)
Command for restoring from CD:
rstlib savlib(ALKMVS) dev(opt01) vol(ALKMVS) Label(ALKMVS)
mbropt(*all) alwobjdif(*all) rstlib(ALKMVS)
where opt01 is your CD-ROM drive.
Make sure all objects were restored. You can ignore security warning
messages. It is okay if MIDQUE does not restore because this file is
created later on.
For Tolls:
rstlib savlib(ALKMTL) dev(opt01) vol(ALKMTL) Label(ALKMTL)
mbropt(*all) alwobjdif(*all) rstlib(ALKMTL)
NOTE: The ALKMVS and ALKMTL Library CD were created using
Kisco Information Systems’ BlueCD, which allows you to create AS/400
readable SAVLIBs on a PC CD writer. A small percentage of users may
have difficulty restoring the ALKMVS Library with the above command.
If you experience problems:
Type RSTLIB, then:
Specify the library ALKMVS or ALKMTL and the appropriate optical
device
b. Press <F10> for more options
c. Specify *ALL on database member options
d. Specify *ALL on allow object differences.
3. The system administrator should make the library ALKMVS or ALKMTL
available to users at sign-on time. There are two ways to insert ALKMVS
into the library list: