Owner`s manual

ManualsBrandsAlive Air ManualsAir CleanerAir Purifier

CLEANING AND MAINTENANCE

(

CONT.

)

Replacing Filters

Replacing UV Lamp

The life span of UV lamp is about 5,000 hours. Replace UV lamp when it is damaged or when no blue light is observed.

Remove the Front Face Plate, W

ashable Pre-Filter

, Washable Plasma Dust Filter

, and HEP

A/Charcoal filter before replacing

the UV lamp (refer to page 7 on how to dissemble).

Softly twist the UV lamp, remove the lamp from its position, and insert a lamp tube of the same model.

Resetting the CLEAN METAL GRID and REPLACE FILTER Indicators

Please change filter when the FILTER

REPLACE

indicator is glowing.

Note:

Please ref

er to page 7 f

or instr

uctions on

filter installation and remo

val.

1. CLEAN MET

AL GRID Indicator

How to Reset:

When the unit is plugged in, but turned off, the resetting

process for the CLEAN METAL GRID indicator is done by

pushing both the RESET

and the TIMER buttons at the

same time.

2. REPLACE FIL

TER Indicator

When the unit is plugged in, but turned off, the resetting

process for the REPLACE FIL

TER indicator is done by

Pushing both the RESET

and the FLOW buttons

at the same time.

After cleaning and replacing filters, reset the CLEAN MET

AL GRID and REPLACE FIL

TER indicators.

Otherwise the two indicators will remain on after servicing the unit.

The unit must be plugged but turned off to reset the CLEAN METAL GRID and REPLACE FILTER indicators.

The RESET

button is inside the unit (cannot be reached with finger).

Please use a toothpick, straightened paper clip or other similar shaped object to push the RESET

button.

ION-UV INDICATOR

RESET

REPLACE FILTER

CLEAN METAL GRID

8HR

2HR

1HR

MED

LOW

QUIET

ODOR DUST ALLERGEN

CLEAN AIR MONITOR

AUTO

FLOW

POWER

TIMER