Instruction manual

9
LED
The camera uses a high-luminance red LED to display the power information.
VIDEO IN
Plug the video source into the Video input to get the image.
NOTE：
The Video interface was used a BNC connector. If the camera does not use BNC, please consult your dealer or retailer
to purchase or buy the adapter to use.
MIC IN
Connect a normal microphone with 3.5mm phone jack to the "MIC IN".
LINE IN
Connect the LINE IN devices s (e.g. MP3, DVD Player and Amplifier microphone) to the "LINE IN"
socket. If ALS-7721 will be connected the normal microphone, it must gain the audio signal
(Through the amplifier) before connected.
Mic
Mp3
Bulit in mic in CCTV
DVD
or
or