Instruction manual

89
Application Setting > Motion Detection
Open the setting frame by clicking on the area to monitor. To move area to monitor, drag the area
with your mouse; to adjust the size of the frame, drag the arrow to adjust after you move the mouse
to the edge of the area and left-click.
Area:
There are 3 frames available for setting: Area 1, Area 2 and Area 3. Click AREA button to open
the detection area then click the signal checkbox to enable the function.
Detect Level:
Adjust the Sensitive of the area by entering the degree of sensitivity in the “Detect Level” field.
The setting range is from 0 to 100. “0” is least sensitive, “100” is extremely sensitive.
Select Save to complete and activate your settings.
Motion detection
1
Setting area