Instruction manual

74
Upload Server Type :
There are two upload server selections: FTP and SMTP (Mail).
FTP:
Refer the chapter: Application Setting > Event > Event Servers (Upload Server) to set the
FTP server first to use this application. Click the checkbox to select the FTP server then click
Save to finish the setting.
SMTP (Mail):
Refer the chapter: Basic Setting > Network > SMTP Server (Mail Server) to set the Mail server
first to use this application. Click the checkbox to input the mail address and subject then click
Save to finish the setting.
Recording Storage Device:
There is one recording storage device: Samba, SD Card and Hard Disk.
Samba:
Refer the chapter: Basic Setting > Network > Samba to set the Samba first to use this
application. Click the checkbox to input the mail address and subject then click Save to finish
the setting.
SD Card:
Refer the chapter: Basic Setting > Storage to format the device first to use this application.
Click the checkbox to input the mail address and subject then click Save to finish the setting.
Hard Disk:
Refer the chapter: Basic Setting > Storage to format the device first to use this application.
Click the checkbox to input the mail address and subject then click Save to finish the setting.
The different application will be used the different method to capture and record. Our company
defines the general parameter to all service.