Instruction manual

45
 Basic Setting > Video / Image > Video Image > Resolution
Generally speaking, selection of resolution is dependent on the bandwidth of the network you are
using. This product offers different selections for video/audio settings. However, to ensure
undisrupted image transmission, you need a higher uploading bandwidth. It is recommended to
use CIF resolution for normal bandwidth.
The product offers 2 image resolutions (PAL/NTSC):
1. D1 (NTSC: 704x576 / PAL: 704x480)
2. CIF (NTSC: 352x288 / PAL: 352x240)
NOTE：
ALS-7721 resolution is according to the video source, so the resolution can only support the D1.
 Basic Setting > Video / Image > Video Image >Frame per Second (FPS):
Set the frame rate from 1~25(PAL)/30(NTSC) in VGA sensor scan mode.
If the network upload bandwidth is insufficient, frame drops might happen such that the
target frame rate may not be reached.
NOTE：
Please refer to the Attachment A: System Requirement for details.
FPS selection
Resolution selection